900 S Coupe L4-2290cc 2.3L DOHC (1995)
To fit
1
Suspend the condenser in position and tighten the two retaining bolts.
2
Install new O-rings on the pipes connected to the receiver. Lubricate the O-rings with synthetic Vaseline.
3
Install the hoses in the PAD connection and tighten the bolt.
Tightening torque: 9 Nm (6.6 lb ft)
4
Plug in the connector on the receiver's pressure switch (two pressure switches in hot-climate countries).
5
Cars with a turbo engine:
Refit the charge air cooler.
6
Fill up with compressor oil, carry out vacuum pumping of the A/C system and fill up with refrigerant.