saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Recall - Throttle Control Lever Bushing Replacement|Page 5402 > < Recall - Throttle Control Lever Bushing Replacement
Page 2
background image

0-ring (turbo, as needed): 42 26 833

An initial parts order of bolts and nickel-plated bushings equal to 50% (order any other part as needed) of the vehicles wholesaled to your dealership will
be shipped automatically on or about April 15, 1997. If our records indicate that you have not received any affected vehicles, no automatic parts
shipment will take place. Order additional parts as needed using DCS ordering procedures.

Action

Please note that procedures for performing this recall have been separated into non-turbo and turbo engine variants.

Non-Turbo:

1.

Undo the clip in the rear, loosen the resonator and move it aside. See Figure.

WARNING

Be careful with the spring package. If you allow it to become unwound, it must be rewound 240 degrees (2/3rds of a complete turn).

2.

Remove the throttle arm shaft bolt.

Recall - Throttle Control Lever Bushing Replacement|Page 5402 > < Recall - Throttle Control Lever Bushing Replacement