900 S Coupe L4-2290cc 2.3L DOHC (1995)
Wiper Motor: Service and Repair
Replacement of Windshield Wiper Assembly
1
To remove the wiper arms, pry off the protective cap at the base, using a screwdriver, undo the nut and lift off the arm.
2
Disconnect the washer hose for the top from the protective cover over the space between the bulkhead partitions.
3
Remove the rubber sealing strip from the partition.
4
Remove the clip for the protective cover over the space between the bulkhead partitions.
5
Raise the cover slightly and disconnect the washer hose from the underside and lift the cover away.
6
Remove the connector from the bracket and Unplug it.
7
Remove the cover for the spindle guides and remove the three bolts securing the mechanism. Lift out the entire windshield wiper unit.