900 S Hatchback L4-2290cc 2.3L DOHC EFI (1997)
8. Remove the springs from the levers.
9. Undo the rear cable guide sleeves and disconnect the cables from the levers.
10. Pull the cables out of the holes on the rear axle.
11. Loosen the right-hand cable from the bracket under the rear heat shield.
12. Remove the cables from the bracket behind the cable adjuster.
13
Cut off the tie that holds the cable under the heat shield.
14. Pull out the cables.
Installation
1. Position the cables, pull forwards and connect them to the front brackets.