900 S Hatchback L4-2290cc 2.3L DOHC EFI (1997)
Engine Mount: Service and Repair
Rear
REMOVAL
1. Suspend the engine from a lifting beam tool No. 83 94 850, or equivalent.
-
Unplug the oxygen (Lambda) sensor connector, remove the cable clamp and clip.
2. Raise the car and remove the front wheels and spoiler sections.
-
Undo the joint between the front exhaust pipe and intermediate pipe.
3. Unbolt the front exhaust pipe from the exhaust manifold.
-
Remove the catalytic converter from its bracket and take down the exhaust pipe.
4. Remove the end piece, steering swivel member on both sides and rear engine mounting.
-
Position a lifting table under the engine, raise the table, undo the other bolts and lower the sub-frame.
5. Remove the rear engine mounting.