900 S Hatchback L4-2290cc 2.3L DOHC EFI (1997)
6. Undo the nuts on the exhaust manifold.
-
The middle part must be removed before the outer part.
-
Note that there are sleeves only on the outer stud screws.
7. Remove the exhaust manifold with its seal.
INSTALLATION
1. Clean the surfaces and install the exhaust manifold with a new seal.
-
The outer part must be fitted before the inner part.
-
Check that the connecting surfaces to the front exhaust pipe are level in order to avoid leakage.
-
Note that there are sleeves only on the outer stud screws, then tighten to: 25 Nm (18.5 ft. lbs.).