900 S Hatchback L4-2290cc 2.3L DOHC EFI (1997)
Oxygen Sensor: Service and Repair
Front Heated Oxygen Sensor (Before Catalytic Converter)
To Remove
1
Remove the resonating chamber.
2
Unplug the sensor wiring connector.
3
Before removing the wiring, note how it is run and the positions of any cable ties.
4
Raise the car and remove the oxygen sensor.
To Install
IMPORTANT:
-
Before fitting, lubricate the threads with Molycote 1000 or the equivalent.
-
When securing the wiring, take care to ensure that it will not come into contact with the exhaust pipe.
Install in reverse order.
Tightening torque: 55 Nm (33 ft lbs).