900 S Sedan L4-2290cc 2.3L DOHC (1994)
The audio system used the SID unit's display for radio, cassette player and CD displays.
When the radio, cassette player or CD player is turned on, the appropriate information will automatically appear on the SID unit's display.
If a CHECK message is activated, the audio display will be replaced by the CHECK message and an acoustic signal will sound at the same time.
CHECK Functions
Should one or more CHECK functions become active, all the other displays disappear except the audio indicator at the bottom. The message
appears in the two lines of the display at the same time as a buzzer sounds and the INFO DISPL lamp lights up in main instrument display panel 2.
The SID unit's display shows the relevant function and if preceded by a plus (+) sign, more than one function is active.
If more than one function is indicated as being active, they will be displayed in the following order of priority:
^
TEST BRAKE LIGHTS
^
BRAKE LIGHTS FAILURE
^
FRONT LIGHTS FAILURE
^
REAR LIGHTS FAILURE
^
CHECK FAN BELT
^
WASHER FLUID LEVEL LOW
^
COOLANT LEVEL LOW
^
TIME FOR SERVICE After a CHECK function has become active the driver must confirm that the message has been received, as follows:
^
acknowledging with the action indicated in the text for the three top-priority messages
^
pressing any button except the BLACK PANEL button for other messages.
After confirmation, the CHECK function will not be shown until the ignition is switched off and on again.
Units and languages
The SID unit contains four different combinations of units:
^
Liter/100 km + °C
^
miles/gallon (imp.) + °F
^
miles/gallon (imp.) + °C
^
miles/gallon (US) + °F
The side instrument contains six different languages:
^
Swedish
^
English
^
German
^
French
^
Italian
^
Spanish
SID unit 2: Press the "INFO" and "CLEAR" buttons simultaneously for more than 2 seconds to enter the unit and language mode.
Use the INFO button to change the units and the CLEAR button to change the language.
To finish, wait for more than five seconds after the last selection or switch off the ignition.
Sid unit 3: Press the "CLEAR" and "SET" buttons simultaneously for more than 2 seconds to enter the unit and language mode.
Use the (-) button to change the units and the (+) button to change the language.
To finish, acknowledge the change with the SET button, wait for more than five seconds after the last selection or switch off the ignition.
Sounds
The SID unit generates different types of sound for different functions.
The different functions are:
^
Warning
^
Time alarm (SID unit 3)
^
Speed warning (SID unit 3)
^
Reminder (warning, ignition key and seat-belt)
^
Confirmation (after pressing button)
^
Direction indicators (TICK TACK)
BLACK PANEL
Instrument lighting is dimmed by pressing the BLACK PANEL button.
