saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 10439 > < Diagram Information and Instructions|Page 10437
Page 12
background image

The SID unit's display lights up only if a CHECK function is activated and then remains alight for 10 seconds, after which it goes out.

If the driver acknowledges the message, the display will go out immediately unless the BLACK PANEL button is pressed again.

The SID unit also lights up if any trip computer button is pressed and then remains alight for 10 seconds after the last button was pressed.

If any of the audio unit's buttons is pressed, the display will light up and then remain alight for 5 seconds after the last button was pressed.

Trip Computer
The trip computer has the following functions: (left-hand side <)
^

TEMP (outside temperature).

^

D.T.E (distance on remaining fuel).

^

FUEL @ (average fuel consumption).

^

Alarm (time alarm, SID unit 3 only). (right-hand side >)

^

DIST (distance to destination, SID unit 3 only).

^

ARRIV (time of arrival, SID unit 3 only).

^

SPD @ (average speed, SID unit 3 only).

^

SPD W (speed warning, SID unit 3 only). 

The trip computer is operated by means of the buttons located below the display.

Diagram Information and Instructions|Page 10439 > < Diagram Information and Instructions|Page 10437