900 S Sedan L4-2290cc 2.3L DOHC (1994)
-
Brake pedal not activated - "OFF".
If this is the case, proceed to point 6.
3
Unplug the brake light switch connector and use a voltmeter to check whether 12 V is present on pin 2 of the connector.
If no voltage is present, check the wiring for continuity/shorting between connector pin 2 and the fuse.
4
Connect a jumper lead between pins 1 and 2 of the connector and select "BRAKE LIGHT SWITCH" from the ISAT scan tool menu. Read the
current status on the ISAT scan tool display.
If it is "ON" ,the fault is in the brake light switch. Change the switch.
5
Connect a BOB and check the lead between Integrated Central Electronics (ICE) module connector pin 25 and brake light switch pin 1 for
continuity/shorting.
