900 S Sedan L4-2290cc 2.3L DOHC (1994)
1.
Remove the outer door handle. See "8. Doors and locks, Adjustment/replacement, Replacing door handle, rear door". Undo the door crash
protector for better accessibility.
2.
Undo the push rod from the door handle and press on lock washer 79 71 518 (not all the way to the adjusting nut). Replace the push rod on the
door handle.
3.
Fit the door handle to the door.
4.
Adjust the nut on the push rod between the door handle and the lock so that there is a small amount of noticeable play in the outer door handle.
5.
Open and close the door a number of times and check the operation of the door lock.
6.
Lock the adjusting nut by pressing the lock washer against it (so that the nut cannot move upwards).
7.
Reinstall all removed parts. See "8. Doors and locks, Adjustment/replacement, Replacing door handle, rear door".
If the water drainage breaks, replace it with part no. 45 50 828 left /45 50 836 right.
8.
Open and close the door a number of times and check the operation of the door lock.
Warranty/Time information
Failed Object:
83434
Fault/Reason code:
71
Location code:
3/4/5
Warranty Type (US):
O1
