900 S Sedan L4-2290cc 2.3L DOHC (1994)
Changing the Engine Mounts continued
1. Raise the car and undo the nuts securing the engine mount to the subframe.
2. Position a jack under the engine and raise the engine slightly or use the engine lifting beam.
3. Remove the bracket with the rear engine mount from the transmission.
4. Change the engine mount.
Tightening torque: 39Nm (29 ft.lbs.)
5. Fit the bracket with engine mount on the transmission.
Tightening torque: 47Nm (35 ft.lb.)
6. Lower the engine and tighten the nuts securing the engine mount to the subframe.
Tightening torque: 39Nm (29 ft.lbs.)
