900 S Sedan L4-2290cc 2.3L DOHC (1994)
7.
Using chain link 83 94 660, join the new chain to the old. Be careful to prevent the chain from failing down and becoming entangled. See Figure 5.
8.
Make certain that the new chain is properly positioned around the camshaft sprocket on the inlet side and fasten the end to the old chain.
NOTE:
On 1987 and earlier cars, remove the oil pipe.
9.
Fit chain support 83 94 652. Remove the protective cloth and tie straps. See Figure 6. Remove the flywheel locking tool from Step 2.
10.
Holding the old chain in your hand, with the new chain resting over your hand, carefully install the new chain by rotating the engine with the
crankshaft pulley bolt wrench (P/N 83 92 961).
NOTE:
To avoid the chain from doubling over at the crankshaft, be sure to keep it under tension the entire time as it is installed.
