900 S Sedan L4-2290cc 2.3L DOHC (1994)
2.
Check that the connector is properly fitted and pushed onto the canister purge valve. If the connector can easily be removed, check if both locating
lugs are on the cable connector.
3.
If both lugs are there, file away at least 4 mm as shown in Figure 2.
4.
Refit the cable connector and check that the canister purge valve is working.
5.
Erase any fault codes with ISAT.
Warranty Information:
Warranty claims for vehicles with this condition may be submitted. The following information must be provided:
Failure Code: 23463-63-9-01/09-01.
Use straight time 23499 for 0.2 hrs.
