900 S Sedan L4-2290cc 2.3L DOHC (1994)
Air Bag: Removal and Replacement
Air Bag Module, Replace
Fig. 8 Driver Air Bag Module Replacement
1. Disable airbag system, refer to, Airbag Arming and Disarming.
2. Remove two airbag module retaining screws. Fig. 8.
3. Disconnect airbag electrical connector, then remove airbag module.
4. Reverse procedure to install. Torque airbag module to 4.1-5.3 ft. lbs.
Passenger Side Air Bag
It may be necessary to clear the DTCs from the control module memory after component has been installed.
