900 S Sedan L4-2290cc 2.3L DOHC (1994)
Secure the windshield trim molding to the roof by means of butyl tape as shown in Figure 2:
1.
Remove the roof sealing from the A-pillar.
2.
Remove the A-pillar trim molding.
3.
Remove the trim molding from the windshield.
4.
Clean the roof and the upper lip of the trim molding with Teroson Cleaner (or equivalent).
5.
Stick butyl tape along the upper lip of the trim molding.
6.
Fit the trim molding in place. Press the molding down so that the butyl tape sticks firmly to the roof and the lip of the trim molding.
Procedure B
Secure the A-pillar trim molding's weatherstrip to the windshield by means of butyl tape on both sides as shown in Figure 3-B.
7.
Clean the A-pillar trim molding's weatherstrip and its surface that is in contact with the windshield using Teroson Cleaner (or equivalent).
8.
Stick a length of butyl tape all the way along the Weatherstrip.
9.
Fit the A-pillar trim molding back in place. Press the weatherstrip down against the windshield so that the butyl tape sticks firmly to both the
weather seal and the glass. Do not refit the roof sealing molding.
Procedure C
Secure the roof sealing molding to the A-pillar by means of butyl tape on both sides.
10.
Clean the roof sealing molding and its surface that is in contact with the A-pillar using Temson Cleaner (or equivalent).
11.
Stick a length of butyl tape on the root sealing molding as shown in Figure 3-C.
12.
Refit the roof sealing molding. Press it against the A-pillar so that the butyl tape sticks firmly to both the sealing molding and the A-pillar.
Procedure D
Windproof the door mirror base on both sides with sealing compound, P/N 30 20 716.
13.
Remove the door mirror.
14.
Use sealing compound to windproof the front end of the external window seal on the door.
15.
Use sealing compound to windproof the front end of the external door frame sealing molding.
16.
Apply a beading of sealing compound along the edge of the recess for the door mirror base on the door.
17.
Use sealing compound to windproof the hole for the electric cable.
18.
Refit the door mirror.
19.
Do not refit the capping on the inside of the door yet.
