saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Electronic Control Module|Page 8968 > < Electronic Control Module|Page 8966
Page 8
background image

The sensor is automatically disconnected in the following cases:

-

If the theft alarm is disarmed.

-

If only the tailgate is disarmed/unlocked.

-

If a door or the tailgate is open as the alarm is armed.

-

If the voltage drops to < + 8.5 V.

Cabriolet

If the soft top is down, the glass breakage sensor should be disconnected manually with the disconnection button in order to avoid false alarms

Ignition

Description Of Function, Ignition

The ignition switch is connected to the control module (pin 10) so that the control module is able to sense the voltage (12 V) if the ignition is turned to
the "ON" position (+ 15). The alarm is set off if the theft alarm is armed. This means that if an attempt is made to start the car, both the alarm and 3
circuit breaking (immobilization of starter and fuel pump relays and + 15 to the engine control system) are set off.

Important:  

-

If the ignition is in the "ON" position (+ 15), the theft alarm cannot be armed.

-

If the ignition is turned to the "ON" position (+ 15) during the alarm delay period, the theft alarm is automatically disarmed.

Horn and Siren

Electronic Control Module|Page 8968 > < Electronic Control Module|Page 8966