900 S Sedan V6-2498cc 2.5L DOHC (1995)
-
Button (left-hand) used to lock/unlock and arm/disarm the theft alarm.
-
Button (right-hand) used to unlock the tailgate and to disarm the tailgate if the alarm is armed.
Changing the battery
The remote control is powered by two batteries and with normal use, the batteries should last for about two years. Change the batteries when the range of
the remote control drops.
For safety reasons, it is recommended that the batteries are changed every year.
Important: After the batteries have been changed, the left-hand button on the remote control must be pressed five times in a row.
New remote control
If the remote control has been lost and a new one is to be used, it must first be programmed (encrypted) with the theft alarm before it is used.
Description Of Function, Remote Control (Part 2 Of 3)
Arming the theft alarm
1
When arming press the left-hand button on the remote control. When the button is pressed, a light confirmation is given by the car's direction
indicators flashing once. The flash/light confirmation for this function is programmable.
2
The car's theft alarm is then armed and all doors are locked by the central locking system which has received a signal from the alarm control
module (pin 17). The tailgate is also armed if it is closed.
3
When the alarm is armed, the LED lights continuously for 10 seconds. During this so- called delay period, the alarm is not armed and passenger
doors (not the driver door), tailgate or hood may be open without the alarm being set off. After the delay period, the LED goes from a continuous
light to flashing once every two seconds to indicate that the alarm is armed.
4
If the driver door is opened during the delay period, the alarm is automatically disarmed. If the driver door is open or if the ignition is on, it is not
possible to lock/unlock the car and arm/disarm the alarm using the remote control.
Disarming the theft alarm
1
When disarming, press the left-hand button on the remote control. When the button is pressed, a light confirmation is given by the car's direction
indicators flashing three times (if the alarm has been set off during the time it was armed, it flashes 5 times). The flash/sound confirmation of this
function is programmable.
2
The car's theft alarm is then disarmed and all doors (except the tailgate) are unlocked by the central locking system which receives the unlock
signal from the alarm control module (pin 6).
3
When the alarm is disarmed, the LED lights for 1 second and then goes out.
Important: It is not possible to arm/disarm the alarm with the key.
