900 S Sedan V6-2498cc 2.5L DOHC (1995)
Lock cylinder
Note: To remove the lock cylinder, the key must first be inserted in the lock to release it.
Door, driver's side
12 Remove the spring from the casting.
13 Remove the locking washer securing the casting to the lock cylinder
Note: When the spring is removed, the nylon cylinder for tensioning the spring is also released.
14 Pull the casting away from the lock cylinder.
Note: Exercise care. The retaining ball is now loose and can easily fall out.
15 Pull the driver off the lock cylinder.
16 Use the key to rotate the lock cylinder 45° anti-clockwise so that it clears the handle and then press it out of the handle.
Door, passenger's side
17 Remove the locking washer securing the driver to the cylinder.
18 Pull the driver and spring off the lock cylinder.
19 Use the key to rotate the lock cylinder 45° anti-clockwise so that it clears the handle and then press it out of the handle.
To fit
Fit in reverse order.
Note:
Lock on driver's side: Grease the retaining ball on fitting it.
The lock cylinder should be fitted with the drain hole at the bottom, facing downwards.