900 S Sedan V6-2498cc 2.5L DOHC (1995)
Parking Brake Shoe: Service and Repair
Removal
1. Lift the car and take off the rear wheels.
2. Press the brake pistons back with a pair of grips.
3. Remove the two brake caliper securing bolts. Disconnect the brake pipe from the clip. Take care not to damage the brake pipe when disconnecting
it. Clamp a welding clamp to the silencer and bind the brake caliper to it with a cable tie. Also suspend the right-side brake caliper with a cable tie.
4. Screw back the handbrake adjustment through the hole in the brake disc.
5. Remove the return spring on the back side.
6. Press the cable holder out of the bracket and remove the cable from the lever.
7. Remove the brake disc.
8. Use special tool 89 95 607 to remove the return springs 89 96 647 for the bracket pin.
9. Remove the brake shoes, lever and adjusting unit.
10. Check the lever and adjustment unit for wear.
