900 S Sedan V6-2498cc 2.5L DOHC (1995)
Oil Cooler: Service and Repair
Installation
NOTE: Step numbers below refer to numbers used in the illustrations.
1. Install new O-rings in place on the two pipe connections and install the heat exchanger in place.
2. Install a new gasket in the cover and install the cover in place.
-
Tighten the screws in a circular sequence, starting in the middle to: 20 Nm (15 ft. lbs.).
3. Install the two heat exchanger retaining nuts and tighten to: 30 Nm (22 ft. lbs.).
4. Install the oil cooler pipes and tighten to: 30 Nm (22 ft. lbs.).
5. Install the oil filter and tighten to: 15 Nm (11 ft. lbs.).
