900 S Sedan V6-2498cc 2.5L DOHC (1995)
Parts:
Camshaft sprockets (2)
46 23 898
Camshaft sprocket retaining bolts (2)
45 04 031
Belt tensioner bracket (1)
46 23 906
Camshaft drive belt (1)
46 21 348
Threadlocking compound (Loctite 242)
$2.50 as sublet
Timing cover seal (1)
45 02 845
Adhesive for seal (1)
46 20 084
Water pump pulley bolts (3)
43 47 738
Water pump (1)
88 21 944
Label kit
02 17 778
Tools:
Cam locking kit
83 94 926*
Video Tape
02 17 828
(issued by Saab Training Department)
* Issued as part of the "essential tools" package for 1994 model year. If you need to order this item, please contact Kent-Moore directly at
1-800-345-2233.
** An initial parts order of the above parts (enough to do one car) was released the week of July 10,1995. Additional quantities should be ordered using
normal ordering procedures. **
Action
1.
Drain the coolant (undo the drain plug or remove the lower radiator hose). Removing the expansion tank cap will accelerate the draining process.
Note
Since there will still be quite a lot of coolant remaining in the engine, always position a suitable receptacle under the vehicle when working on the
coolant system.
2.
Remove the Poly-V belt and timing cover. See Page 215-1 of Service Manual 2:1 Basic Engine, B258.