900 S Sedan V6-2498cc 2.5L DOHC (1995)
INSTALLATION
1. Clean the surfaces and install the exhaust manifold with new seals, then tighten to: 20 Nm (15 ft. lbs.).
2. Insert the front exhaust pipe and screw it on to the exhaust manifolds.
-
Use new seals, then tighten to: 40 Nm (30 ft. lbs.).
3. Screw the joint under the car together, then tighten to: 20 Nm (15 ft. lbs.).
-
Lower the car.
4. Reconnect the oxygen sensors cables and install the cable clamps and the clips.
