saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Exhaust System - Vibration|Page 3376 > < Exhaust - Sulfur Smell|Page 3367
Page 1
background image

Exhaust Pipe/Muffler Hanger: Customer Interest
Exhaust System - Vibration

CATEGORY
Engine

SECTION
2

PAGE
54

ISSUE
05/95-0579

CODE
254

Subject:
Correcting Complaint of Exhaust Vibration Caused by Broken Catalyst Support Bracket

Application:
Certain 1994 and 1995 900 Models See VIN Serial No. Ranges under Cars Affected.

If a customer complains of a very loud exhaust vibration, check that the steel bracket installed between the engine and catalytic converter has not broken.
If upon investigation this bracket is found to be cracked/damaged, it can be replaced with a new-developed spare parts kit as described below.

Cars Affected:
Manual or Automatic Transmission Equipped Vehicles -
1994 900 models with naturally aspirated 4 cylinder engines within VIN Serial No. R2000001-R2042438
1995 900 Convertibles models with naturally aspirated 4 cylinder engines within VIN Serial No. S700000-S7001308
1995 900 models with turbocharged engines within VIN Serial No. S2000001-S2031829
1995 900 Convertible models with turbocharged engines within VIN Serial No. S7000001-S7020425

Parts:

Kit

4624557

Consists of:
^

an upper bracket which is to be bolted to the engine block

^

a rubber support

^

a lower bracket which is to be bolted to the catalyst 

^

requisite bolts

^

spacer

The kit also includes all necessary new bolts and spacers.

Action:

Exhaust System - Vibration|Page 3376 > < Exhaust - Sulfur Smell|Page 3367