900 S Sedan V6-2498cc 2.5L DOHC (1995)
5. Refit the coolant hoses on the heater box and tighten the hose clips.
6. Fill up with coolant.
7. Bleed the system as follows:
-
Fill the system to the MAX level, refit the pressure cap, start the engine and warm it up, preferably at varying speeds, until the radiator fan
cuts in.
-
Remove the pressure cap and top up to the MAX mark.
-
Refit the pressure cap and run the engine at varying speeds until the radiator fan cuts in three more times. Switch off the engine and top up
to the MAX level as necessary.
