900 S Sedan V6-2498cc 2.5L DOHC (1995)
7. Open the cock on the blue low-pressure hose on the pressure gauge stand and continue filling until the pressure has stabilized.
8. Close the cock on the blue low-pressure hose on the pressure gauge stand.
9. Start the engine and wait until the compressor starts to work. Rev up the engine so that the pump vanes are flung outwards (this will be noticed by
the pressure dropping below 3 bar on the gauge by the blue low-pressure hose on the pressure-gauge stand).
10. Open the cock on the blue low-pressure hose on the pressure-gauge stand when the compressor starts working so that the remaining amount of
refrigerant is sucked into the compressor.
11. Close the cock on the blue low-pressure hose on the pressure gauge stand when the bottle with refrigerant is empty.
12. Close the valve in the snap-on coupling on the blue low-pressure hose on the low-pressure side of the A/C system by turning the knob
anticlockwise.
13. Remove the blue low-pressure hose's snap-on coupling and refit the protective plug in the service valve.
14. Close the cock on the flask with refrigerant.
15. Remove the yellow hose from the flask with refrigerant.
