900 S Sedan V6-2498cc 2.5L DOHC (1995)
The resistance should be < 1 ohm.
If the resistance is OK, go to point 7.
If the resistance is not OK, check the wiring for continuity/shorting.
7
Using a voltmeter, check the lamp's power supply as follows:
-
between connector pin 3 and a good grounding point for the front parking lights.
-
between connector pin 1 and a good grounding point for the side marker lights.
-
between connector pin 1 for the left-hand rear parking lights and connector pin 3 for the right- hand rear parking lights and a good grounding
point.
A reading of 12 V should be obtained.
8
If a different reading is obtained, check the wiring for continuity/shorting as follows:
-
for the front parking lights, between the fuse and the lamp.
-
for the rear parking lights, between ICE module connector pins 27 (left-hand) and 3 (right-hand).
Power Supply and Grounding
