saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3503 > < Initial Inspection and Diagnostic Overview|Page 3501
Page 43
background image

1

Plug in the Intelligent Saab Tester (ISAT) scan tool and select "READ FAULT CODES" from the menu. If any trouble codes are present,
continue in Trouble Code Tables See: Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Descriptions/B
Codes/Body Control Module

2

If no trouble codes are present, check the battery voltage by means of the ISAT scan tool.

3

Connect a BOB and check the leads for continuity/shorting as follows:
-

between pin 47 of the Integrated Central Electronics (ICE) module and the fuse holder for fuse 35.

-

between pin 41 of the Integrated Central Electronics (ICE) module and the fuse holder for fuse 21.

-

between pin 34 of the ICE module and the fuse holder for fuse 17. 

-

between pin 65 of the ICE module and pin B of the ignition switch.

Rear Fog Light

Initial Inspection and Diagnostic Overview|Page 3503 > < Initial Inspection and Diagnostic Overview|Page 3501