900 S Sedan V6-2498cc 2.5L DOHC (1995)
Valve Body: Service and Repair
NOTE: Component identifier numbers used in the following illustrations relate to specific steps in the procedures below.
Removal
1. On models with 6-cylinder engines, remove the engine covers.
2. On all models, remove the transmission's breather hose.
3. Hook a suitable lifting beam onto the engine and raise the car.
4. Remove the air deflectors.
5. Remove the engine mount retaining bolts.
6. Remove the ground cable and engine mount bracket's retaining bolts.
7. Place an oil pan under the transmission and remove the cooling hoses.
-
Plug the holes and bend the hoses aside.
8. Remove the bolt securing the temperature sensor's cover (and also the valve housing cover).
9. Remove the 8 remaining bolts.
10. Lift up the valve housing cover and turn it to the right of the engine mounting.
-
Use a rubber mallet to knock the cover loose.
