900 S Sedan V6-2498cc 2.5L DOHC (1995)
Removal
-
Remove selector lever and the sealing ring with slide hammer and puller tool No. 87 92 111, or equivalent.
NOTE
-
Lubricate and tap in a new sealing ring with driver tool No. 87 92 210, or equivalent.
Sealing Ring on Right Seal Holder
NOTE: Component identifier numbers used in the following illustrations relate to specific steps in the procedures below.
Removal
1. Remove the seal holder.
2. Press out the sealing ring with tool 87 91 311 and support 87 92 236.