900 S Sedan V6-2498cc 2.5L DOHC (1995)
5. Assemble and install the 2nd gear's synchromesh on the 2nd gear's gear wheels.
-
Install the bearing sleeve in the 2nd gear's gear wheel and install the entire unit in the sleeve and the synchromesh hub.
-
The heels on the baulk ring should fit in the notches in the synchromesh hub.
6. Hold down the gear wheels and change gears as a test.
7. Install an output shaft assembly tool over the synchromesh unit so that it does not fall apart during assembly.
