900 S Sedan V6-2498cc 2.5L DOHC (1995)
Windshield Washer Pump: Service and Repair
To remove
1
Raise the car, undo the wing liner (at front only) in the front left-hand wheel housing and bend it out.
2
Disconnect the hoses from the pump motor and ease up the pump to remove it from the washer fluid reservoir.
3
Unplug the connector.
To install
NOTE: When fitting a new washer pump, transfer the strainer from the old pump to the new one.
In other respects, install in reverse order.
