900 SE Convertible L4-1985cc 2.0L DOHC Turbo EFI (1998)
Alarm Module: Service and Repair
Electronic Control Module, SE/US/CA
First detach the negative lead (-) from the car battery.
1
Lift the left-hand front seat to its uppermost position.
2
Remove the scuff plate.
3
Lift the carpet just in front of the B pillar to gain access to the control module.
3-D: Remove the seat-belt bolt located on the floor.
4
Remove the two plastic nuts securing the control module and lift it out.
5
Unplug the connector to the electronic control module.
6
Install in reverse order