900 SE Convertible V6-2489cc 2.5L DOHC EFI (1997)
Repair/Action code: 01
*Labor Operation (US): See below for specific information
81424 R & R tonneau motor: 1.0 h
Straight time: 0.4h to check both sides
(CA: 83365 1.4 hrs)
81424 R & R tonneau motor: 1.0 h
Straight time: 0.7h to check both and adjust one side
(CA: B3366 1.7 hrs)
81424 R & R tonneau motor: 1.0 h
Straight time: 1.1h to check both and adjust both sides
(CA: 83367 2.1 hrs)*
Procedure
1
Remove the soft top (tonneau) cover drive unit (bracket and motor). Follow the directions for removing the soft top (tonneau) cover motor,
without dismantling the motor and potentiometer from the bracket. See "8. Convertible, Adjustment/Replacement, Soft top cover motor".
2
Inspect the square stub axle to make sure it is not worn, twisted or damaged in any other way that will cause excess play. Use the square jaws of a
vernier caliper, for example, to check for straightness of the stub axle.