900 SE Convertible V6-2489cc 2.5L DOHC EFI (1997)
Oil Pan: Service and Repair
Oil Sump, Oil Strainer and Antislosh Baffle, to Change (In Car)
NOTE:
^
Step numbers below refer to numbers used in the illustrations.
^
In vehicle.
REMOVAL
1. Raise the car, drain the oil and remove the subframe, refer to Suspension and Steering.
2. Undo the oil pan retaining bolts and remove the oil pan.
3. Remove the bolts in the on strainer holder.
-
Remove the oil suction pipe's retaining bolts in the oil pump.
-
Remove the strainer.
-
Note the oil suction pipe's O-ring.
4. Remove the antislosh baffles.