900 SE Convertible V6-2489cc 2.5L DOHC EFI (1997)
Front Crankshaft Seal: Service and Repair
Removal
NOTE:
^
Step numbers below refer to numbers used in the illustrations.
^
In vehicle.
1. Remove the air cleaner and mass air flow sensor.
2. Slacken the pulley bolts slightly.
-
Remove the multigroove drive belt, the belt tensioner, power steering pump pulley, water pump pulley and cover.
3. Remove the right-hand front wheel and the cover in the wheel housing.
-
Remove the crankshaft pulley (undo the six bolts but do not remove the centre bolt).