900 SE Convertible V6-2489cc 2.5L DOHC EFI (1997)
6. Remove the right-hand front wheel and the cover in the wheel housing. Remove the crankshaft pulley (undo the six bolts but do not remove the
centre bolt).
7. Zero the engine. The markings on the camshaft sprockets and timing cover should be in alignment as also should the marking on the crankshaft.
Use locking tools 83 95 006 and KM-800-2 for the camshaft sprockets and locking tool KM-800-10 for the crankshaft.
8. Before removing the toothed belt, mark its direction of rotation . To facilitate refitting, the belt can be marked at both the camshaft marking and
the crankshaft marking.
9. Release the belt tension and remove the toothed belt.
To fit