900 SE Convertible V6-2489cc 2.5L DOHC EFI (1997)
Conductive Foil: Service and Repair
-
Remove all the bulb sockets and be careful to make a note of where the GREY one was filled.
-
Remove the 3 steel screws and the 7 brass screws.
-
Carefully lift off the conductive foil.
To fit
-
Install the conductive foil carefully on the rear unit and refit the bulbs in their right places.
NOTE: Make sure that the screws are fitted in the correct places.
Take care to install the GREY bulb socket in its correct place.