900 SE Convertible V6-2489cc 2.5L DOHC EFI (1997)
Seat Belt Tensioner: Service and Repair
Front Seat Belts W/Detonated Tensioner
WARNING: If the belt tensioner is not detonated it should be scrapped.
Removal
1. With the ignition off, remove the negative battery lead.
2. Remove the front screw from the slide rail and slide out the belt.
3. Remove the air nozzle grille by unclipping the inner B pillar trim from it.
4. Remove the screw securing the inner B pillar trim to the outer.
5. Pull away, the inner pillar trim (snap fasteners).