saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 9774 > < Diagram Information and Instructions|Page 9772
Page 17
background image

Symbols - Crimped Connections

Crimped connections
To reduce the number of connectors used in the car, the various wiring harnesses contain several crimped connections. They are used as fixed
connections and also as connectors. The number of poles in the connector may vary, depending on the market and car version. The maximum
version is always shown on the wiring diagram. There is no pin numbering on the connectors.

How they are drawn on the wiring diagram is shown in the above image.

General Information

GENERAL INFORMATION ABOUT FUSES

The car's +12 V power supply is fed to the various consumer units via three main fuse boxes, one in the dashboard, one in the engine bay on the
bulkhead partition and a Maxi fuse holder in the engine bay behind the battery. Most of the fuses and relays are located in the main fuse box.

The fuses are of blade type and, together with their connecting sockets, give rise to a lower voltage drop than earlier types. They are also more
resistant to corrosion.

Blade fuse colour coding:

Fuse

Color

5 Amps

Light brown

7.5 Amps

Dark brown

10 Amps

Red

15 Amps

Blue

20 Amps

Yellow

25 Amps

Transparent

30 Amps

Green

40 Amps

Orange

30 Amps

Green (Maxi)

40 Amps

Orange (Maxi)

60 Amps

Blue (Maxi)

Checking Blade Fuses

Checking blade fuses

Each blade fuse has test sockets which can be used to check that the fuse is intact without the need to remove it. If both sockets are live, the fuse is

Diagram Information and Instructions|Page 9774 > < Diagram Information and Instructions|Page 9772