900 SE Convertible V6-2498cc 2.5L DOHC (1995)
5.
Rivet the four Velcro fasteners in place using the 12 pop rivets, P/N 47 67 422. Press down hard when riveting. See Figure 1.
NOTE:
If you do not use rivet, P/N 47 67 422, the compressed end of the rivet will be visible on the top.
6.
If the tape is undamaged and satisfactorily conceals the rivet heads, the tape does not need to be changed.
However, if the tape is damaged and the rivet heads are visible, the tape should be changed. Use tape, P/N 46 95 870. If the tape should be
missing, fit this same part number.
7.
Refit the headliner. Start at the outer edges and tap the Velcro fasteners into each other using a plastic mallet.
Warranty Information:
To resolve a customer complaint for a vehicle in warranty, submit a claim using the following information:
Failure code: 85811-35-0-01-05.
^
Enter 0.5 in straight time.