900 SE Convertible V6-2498cc 2.5L DOHC (1995)
33.
Use a 35 mm hole saw to cut a hole for the plastic plug.
34.
Deburr the hole and fit the plastic plug.
35.
Remove the protective paper from the tape and fit this to the plastic cover. This prevents scratch marks from the first bow.
36.
Fit the plastic cover. First screw two new screws into the threaded inserts and then fit the original two bolts. Press in the clips on the cover starting
from the center and working outward.
Warranty/Time Information
See separate information.
