900 SE Convertible V6-2498cc 2.5L DOHC (1995)
Exhaust Pipe: Service and Repair
NOTE: Step numbers below refer to numbers used in the illustrations.
REMOVAL
1. Disconnect the oxygen sensors cables, undo the cable clamps and the clip and lift up the car.
NOTE:
^
Do not twist the cables.
^
The oxygen sensors are sensitive to blows and impacts and must be handle with care.
2. Remove the oxygen sensors, one for each cylinder bank.
3. Undo the joint between the front exhaust pipe and the catalytic converter.
4. Unscrew the front exhaust pipe from the exhaust manifolds.
NOTE: There are seals between the exhaust manifold and the front exhaust pipe.