900 SE Convertible V6-2498cc 2.5L DOHC (1995)
Housing Assembly HVAC: Service and Repair
Heater Housing, Installation
1.
Position the heater box in place.
2.
Check that the 0-rings are in place and that they are undamaged. Refit the hoses and secure them with the clips.
3.
Close the heater-box housing enclosure.
4.
Refit the rear air ducts on the floor and secure them with a cable tie. Carry out the following operations:
-
Refit the center console.
-
Refit the ACC control unit.
-
Refit the switches for the window lifts.
-
Refit the rear part of the center console.
-
Refit the rear air vent and cover.
-
Refit the rear ashtray.
-
Refit the cover round the ignition switch.
-
Refit the panels on both sides of the centre console.
-
Refit the glove box.