900 SE Convertible V6-2498cc 2.5L DOHC (1995)
Symbols - Fuses
Fuses
In the wiring diagrams, every subsystem is generally shown from the relevant fuse in the main fuse box up to the relevant component or
components and on to the grounding point or direct chassis connection.
The power supply to each fuse is shown separately in the system group for positive voltage supplies, where the car's main fuse box, ignition
switch, etc. are also covered.
Example:
If the supply to a fuse comes from the +30 terminal, the circuit to the fuse in question will be found in the section headed "Power supply, +30
circuit".
Symbols - Grounding Points
Grounding points
Most of the car's grounding points have a component number consisting of a letter and a number, e.g. G2 or G29. The locations of the grounding
points on the car are shown under Diagram Information and Instructions/Ground Information.
Switches, relays and components
Unless otherwise indicated, switches and relays are represented in their unactivated and unenergized state.
When the box around the component is drawn with a solid line, the whole component is shown.
When the box around the component is drawn with a broken line, only part of the component is shown.
