900 SE Convertible V6-2498cc 2.5L DOHC (1995)
Timing Belt: Service and Repair
Camshaft drive
Warning!
The camshafts must not be rotated because the valves could touch the pistons or each other and become damaged. The crankshaft may
only be turned between 0° and 60° BTDC when the camshafts of both cylinder heads are locked with locking tools.
To remove
1. Remove the air cleaner complete with hoses.
2. Slightly loosen the bolts securing the crankshaft pulley. Relieve load from the belt tensioner by turning the belt tensioner pulley locking bolt
forward in the car using a 15 mm wrench. Remove the belt from the coolant pump pulley and carefully release the belt tensioner.
3. Remove the belt tensioner and remove the power steering pump pulley.
4. Remove the water pump pulley (to do this you will have to press the engine towards the left in the car - use the engine bracket as a fulcrum).
5. Remove the timing cover.
