900 SE Convertible V6-2498cc 2.5L DOHC (1995)
2.
Unplug the connector and extract the pin at position 23 (grey/green lead).
3.
Cut off the connector.
4.
Crimp the grey/green lead together with the capacitor's lead in a new terminal.
5.
Refit the pin in position 23 and plug in the connector.
6.
LHD: fit the interference suppression capacitor on the left-hand grounding screw at grounding point G33.
RHD: fit the interference suppression capacitor on the right-hand grounding screw at grounding point G34.
7.
Check the result of the above measures by opening and closing the door when the radio is switched on.
8.
Refit all parts that have been removed.
C3. Ignition System Interference
To check
Ignition system interference can occur on 4-cylinder cars equipped with the Motronic engine management system. The "ticking" sound is heard at its
loudest when the engine is idling and diminishes with increasing engine rpm.
Procedure
The fault can be rectified by fitting interference suppression kit 49 00 015 (CA=30567189) (4 grounding braids) as described below:
