900 SE Convertible V6-2498cc 2.5L DOHC (1995)
"Door open" indicator lamp
5
Select "ACT. INSTR. FUNCT" from the ISAT scan tool menu and then "DOOR INDIC. LAMP". The lamp in the main instrument display panel
should light up when the ignition switch is "ON".
6
If it does not, connect a BOB with the ICE control module unplugged and ground pin 31. If the lamp lights up, proceed to "Before Changing an
Electronic Control Module". If the lamp does not light up the bulb is probably faulty and should be changed.
