900 SE Convertible V6-2498cc 2.5L DOHC (1995)
Remember:
-
All readings should be obtained with the use of a Breakout Box (BOB) connected between the control module and the control module connector.
-
Several voltage levels should be regarded as guiding values only. Use your common sense when judging whether a particular reading is correct or
not.
-
If a test reading is wrong, consult the wiring diagram to find out which cables, connectors or components should be checked further.
-
All test readings are with the engine at normal operating temperature.
-
Unless otherwise stated, the ignition should be switched on.
-
Specified readings are for calibrated Fluke 88/97.
