900 SE Convertible V6-2498cc 2.5L DOHC (1995)
Integrated Central Electronics (ICE) Control Module: Service and Repair
LHD
1
Remove the cover of the main fuse box on the side of the dashboard.
2
Remove the knee shield above the pedal assembly.
3
Lift out the air duct to facilitate access to the relay holder behind it.
4
Remove the screw securing the relay holder and press the holder down.
The Integrated Central Electronics (ICE) module is mounted above the relay holder.
5
Install in reverse order.
Important: After a control module has been replaced, the new control module will have to be programmed, see "Programming the ICE Module". See:
Adjustments
RHD
1
Remove the cover of the main fuse box on the side of the dashboard.
2
Remove the knee shield above the pedal assembly.
3
Undo the screws securing the relay holder.
4
Push the relay holder aside.
The ICE control module is mounted behind the relay holder.
Install in reverse order.
